Skip to content

Assembly

Follow this guide to assemble your 3MS.

Printed Parts

Mounting

  • Univeral M3 Mount for Extruder Note that this requires 2-4 M3 bolts and a place to screw the bolts into (like an aluminum extrusion with T-nuts).
  • 3MS Box This is designed for four filament units and a BTT MMB. Designed by chadakken.

Other

Filament Units Assembly

  1. If using any mounting parts, place it on the face of your NEMA17 motor.
  2. Assemble the MK8 extruders using the instructions that came with them.
  3. Repeat for all filament units.

Wiring

Note for Certain Printers

If your printer has Klipper running internally (not on an external computer like a Raspberry Pi), the controller (if not a main MCU config) is plugged into a USB port on the printer itself.

Follow one of the following guides based on your controller:

Recommended: BTT MMB

Other Controllers:

Comments